A SERVICE OF

logo

Open as PDF
next previous
Mount Installation 7
MAN0064 (Rev. 7/20/2007)
Install Grill Guard (Optional)
Attach grill guard (21) to front mount (3) using four
(two per side) cap screw (23), lock washers (25),
hardened flat washers (24) and hex nuts (22).
Torque hardware to: . . . . . . . .85 lbs-ft (115 N-m)
3. 1001642 Front mount
21. 57822 Grill guard
22. 1093 1/2 NC Hex nut
23. 3379 1/2 NC x 1-1/2 HHCS GR5
24. 57816 1/2 Hardened flat washer
25. 855 1/2 Lock washer
Figure 7. Grill Guard Installation
Torque Hardware
Torque all hardware to specifications listed below.
TORQUE SPECIFICATIONS
Ref Cap Screw Qty
Wrench
Size Required Torque
12 3/4 NC x 1-3/4 4 1-1/8” 297 lbs.-ft. (403 N-m)
13 5/8 NC x 1-1/2 (Carriage Bolt) 12 15/16” 170 lbs.-ft. (230 N-m)
16 3/4 NC x 2 4 1-1/8” 297 lbs.-ft. (403 N-m)
17 5/8 NC x 1-1/2 2 15/16” 170 lbs.-ft. (230 N-m)