Filter
Top Products
Operating Instructions
31
Instrument Panel
This illustration shows the conguration of the
switches and indicators located on the instrument
panel.
Instrument Panel
Hourmeter
The hourmeter, which is located on the instrument
panel, displays operating time accumulated while
the ignition switch is in the RUN position.
The hourmeter provides maintenance reminders af-
ter certain hours of operation. The hourmeter screen
will start ashing the reminder one hour prior to the
recommended interval and will continue until one
hour after the recommended interval (two hours).
The hourmeter does not have a manual reset
function.
Procedure Interval* Reminder
Oil Change
(Break-In)**
4-6 Hours
C
H
G
OIL
Lubricate
and Check
Levels
24-26 Hours
LUBE
Oil Change 49-51 Hours***
C
H
G
OIL
* These intervals reect the actual time that the
reminder will ash (one hour prior to and one
hour after the recommended interval).
** This reminder is only used one time.
*** In normal operating conditions, oil changes in
100-hour intervals are acceptable. Walker and
the engine manufacturers recommend engine
oil changes every 50 hours in extremely dirty or
dusty conditions or for units with less than 100
hours annual use.
Warning
Horn
Over Temperature
Warning Light
Oil Pressure
Warning Light
Hourmeter
Voltmeter
Light Switch
(Optional)
7 AMP
Circuit Breaker
Engine
Service
Light
Ignition
Switch