Filter
Top Products
10
Tips for Precision Cutting
For the most precise cutting possible,
be sure to select the appropriate line
cutting height and trimmer line size
(thickness) for the conditions at hand.
When mowing, let the cutting head rest
lightly on the ground and do not lift up
on the handlebars. This allows the cut-
ting head to follow the ground contour
closely, resulting in the most even cut
possible. Also, be sure to ease into
heavy growth to prevent overwhelming
the machine.
Trim When Wet or Dry
Grass and most other materials are
most efficiently trimmed when dry.
But, the trimmer/mower will do a fine
job even with damp or wet materials.
When conditions are moist or damp, be
sure to clean debris off the machine
regularly to keep cutting efficiency
high. And watch your footing!
Clean the Trimmer/Mower
On a Regular Basis
Clean under the mower deck frequently
to remove any grass buildup. Also
clean around the muffler and on top of
engine. See the cleaning instructions
in Section 5: Maintenance.
Do Not Let the Trimmer
Lines Become Too Short
Once the trimmer lines are worn to less
than 1/2 their original length, trimming
jobs begin to take far longer than they
should.
As a general guideline, once the line
length becomes half of its original
length, it’s time to change to new lines.
Use Extreme Caution on Slopes
When operating on sloping ground,
use extreme caution and common
sense to avoid possible injury or prop-
erty damage.
Do not mow on excessively steep
slopes! Avoid slopes if greater than
15
0
or wherever footing is unsure. If a
slope is difficult to stand on, it is prob-
ably too steep to trim or mow. In this
case, it may be wiser to establish a per-
manent ground cover on this area.
Do not trim on slopes when the ground
is slippery. Trim across the face of a
slope, not up and down. Slow down
and exercise caution when changing
direction on slopes.
Use Correct Walking Speed
Use a walking speed that is suitable for
the conditions at hand. For example,
you’ll get better trimming and mowing
results at slower walking speeds if the
grass is tall or lush. Shorter grass or
less dense growth can be cut at faster
travel speeds.
Vary the Throttle Setting
According to Conditions
The majority of trimming and mowing
jobs will yield the best results if the
Engine Throttle Control is set at the
fastest engine speed.
Less demanding jobs that require very
precise cutting will yield better results
if the engine throttle is backed off
somewhat to reduce engine speed.
(For example, damage to trees and or-
namentals can be avoided by reducing
the engine speed; using the lighter
.130" diameter line; and by keeping a
safe distance away.)
Again, once you begin a particular job
and get a “feel” for the conditions, you
will be able to make adjustments for
the best possible results.
Keep the Mowed Side to Your
Right as You Move Ahead
The trimmer/mower feeds cut materials
to the right side. Stay on the right side
of unmowed growth as you move
along.
THROWN OBJECT HAZARD
• Objects such as rocks, pebbles,
and small debris will be thrown
violently by the cutting head,
resulting in significant hazard to
eyes and exposed body parts.
• Always wear safety-approved eye
protection and suitable clothing
and footwear.
• Keep children, pets and bystanders
50 feet away from machine while
operating.
• Be alert to hidden obstacles.
Failure to comply could result in
injury or property damage.
WARNING
ADDITIONAL OPERATING TIPS
AND TECHNIQUES
NOTE: If the trimmer is operated in
a stationary position with the wear
cup in contact with dry vegetation,
significant heat will result that may
deform the plastic spindle or scorch
vegetation.
Section 4: Operation