Filter
Top Products
6F3B0253
Basic Hardware and Function 279
9. Maintenance and Checks
(Periodic checks - continued)
Item Check Criteria
Environment Check that the temperature, humidity,
vibration, dust, etc. are within the
specified range.
Must be within the range of
general specification.
Check that the functions of the
programming tool are normal.
Monitoring and other operations
are available.
Programming tool
Check that the connector and cable
are not damaged.
Not damaged
User program Check that the T1-16S program and
the master program (saved on a floppy
disk, etc.) are the same.
No compare error
9.4 Maintenance parts
To recover from trouble quickly, it is recommended to keep the following spare parts.
Item Quantity Remarks
T1-16S basic unit 1 Prepare at least one to minimize the down-time
of the controlled system.
Programming tool 1 Useful for the troubleshooting procedure.
Master program As required Saved on a floppy disk, etc.
Expansion rack or
unit (if any)
1
I/O module
(if any)
One of each type
used
Fuse for I/O
module (if any)
One of each type
used
Battery (CR2032) 1
These spare parts should not be stored in high temperature and/or humidity locations.