Filter
Top Products
Manual operation enables the automatic watering pro-
grams or selected stations assigned to the program to be
started manually. During operation, temporary changes
can be made to increase or decrease the station run
time, step through the station sequence and pause or
stop watering using the “Watering Control Features”
described on page 28. Upon completion of the manual
watering operation, the controller will return to the Auto-
matic mode.
Starting Programs and/or Stations Manually
You may choose to operate all stations or selected sta-
tions in each program. Watering programs can be start-
ed individually or set to start in order. When one program
finishes the next selected program will operate.
Ensure the control dial is in the
RUN position.
Position the
PROGRAMS switch to select a program
you wish to start.
Press the
MANUAL START button. The first station
number assigned to the program will start flashing.
• To operate the program with all assigned stations,
continue at step .
• To operate only selected stations, press the +/
ON
button to select the flashing station number, or press
the –/
OFF button to skip the station number. Continue
selecting stations in this manner. Only the stations
remaining on the display will operate.
Press the
MANUAL START button.
6. To select additional programs, repeat steps
through .
Note: Additional programs set to start will operate
one at a time in alphabetical order regardless of the
order they were selected. Each program letter will be
displayed as it is selected. The program currently
operating is indicated by the flashing letter.
Manual Operation
27
PGM A B
123456
4
4
5
3
1
2
Flashing
Flashing
Example: Program A is operating. Program B will start
when program A is finished.