Filter
Top Products
Setting An Interval Schedule
Turn the control dial to the WATERING DAYS
position.
Check the
PROGRAMS switch setting. If necessary,
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
Int (Interval) is not displayed, press the +/
ON or
–/
OFF button as needed to select Int.
Press the
NEXT button. The current Interval number
(1–7) will begin flashing. The day of the week on
which the Interval will start will be shown.
To change the Interval number, press the +/
ON or
–/
OFF button until the desired number is flashing.
Press the
NEXT button. The Interval start day will
begin flashing.
To change the Interval start day, press the +/
ON
button or the –/OFF button until the desired day is
flashing.
8. To set an Interval schedule for another program,
repeat all of the steps beginning at step .
When you have completed setting the Interval
schedule for each program (as needed) return the
control dial to the
RUN position.
18
9
5 7
4 6
3
5 73
2
PGM A
3
5
7
4
1
3
2
MO
6