Filter
Top Products
Assembly Section 2-9
ASSEMBLY
INSTALLING NATIONAL PIPE FITTINGS
Whenever installing a pipe fitting, wrap the threads clockwise (looking at the end)
with teflon tape. In this way, the tape will be tightened when installed. NOTE: It is
not necessary to tape O-ring fittings, or those installed in swivels.
HUSCO LOAD SENSE LINE INSTALLATION
To install the load sense line from a Husco valve to the tractor remote valve, first
locate the load sense port located on the bottom of the end cap. Remove the plug and
install 14mm elbow, then attach the 1/4” hose to the end cap and to the top front port on
the Husco valve.
For more information refer to the Parts Section pages for a complete diagram of the
tractor valve hookup.
PRESSURE
RETURN
LOAD SENSE END
2004 UPDATES APPLY TO THESE MODEL’S
JD6000 SERIES SERIAL #’S WITH THIS CHANGE: 391333, 391640, 392239, 395891, 396190, 397161,
396515, 396572, 396560, 396777, 396754, 396764, 396981, 397327, 396983, 396987, 397165, 397159,
397211, 397773, 397450, 397354, 397341, 397498, 397527, 397520, 397360, 397475, 397538, 397569,
397554, 397545, 397585, 397506, 397570, 397587, 397575, AND MODEL #’S STARTING WITH #398797.
JD7000 SERIES SERIAL#’S WITH THIS CHANGE START AT: 12451
HUSCO
VALVE
LOAD SENSE