Filter
Top Products
Getting Started
AFG3000 Series Quick Start User Manual
21
Equivalent Output Circuits
The following illustrations show the equivalent output circuits for the AFG3000 series instruments:
1. AFG3011
■ Output signals do not exceed ±20 V
when the >50
Ω load impedance is
used.
2. AFG3021B and AFG3022B
■ Amplitude and offset of the output
signals are not affected by load
impedance.
3. AFG3101/AFG3102
■ Output signals do not exceed ±10 V
when the >50
Ω load impedance is
used.
■ Voltage over the maximum level is
clipped.
■ Amplitude and offset are affected
when you change the load imped-
ance. The maximum and minimum
levels do not exceed ±10 V, respec-
tively.
4. AFG3251/AFG3252
■ Output signals do not exceed ±10 V
when the >50
Ω load impedance is
used.
Offset
50 Ω
Signal
Offset
50 Ω
Signal
Offset
50 Ω
Signal
Offset
Signal
50 Ω
Current source
Voltage source