Filter
Top Products
PN 8500-0150, Rev. A, May 2005 19
Operating Manual
Operation
Set Defaults
Command Format:
Description:
Returns the unit to a default state.
Table 2 Default Values
Parameter Default Value
Discipline On
Dynamic Gain Floor 4
Dynamic Gain Ceiling 30
Dynamic Gain Rate Factor 0.0005 ns
Dynamic Gain Offset Factor 5.0 ns
Km 0.99997
Ko1 0.99984
Ko2 0.99984
Disgain 1280
Resync Threshold 1 µs
Resync Delay 60 seconds
Rate Threshold 0.04 µs
Burst On
DAC 32767
Start-up Parameters See Note 1: Start-up Parameters, on page 20.
Default Calibrate Unit (Cable Delay) 0
1PPS Offset 0
Input Threshold High
Programmable Delay Value 036
Oscillator Control Range 5e-9
Design Verification Off
Rate Error TC 0.9995
Offset Error TC 0.9995