Filter
Top Products
RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 42
STORAGE
Storage
Proper procedure for long term storage of the Crack
Saw will protect it against the effects of corrosion
and damage. If the Crack Saw is not to be operated
for a period of 30 days or more, proceed to store as
follows:
1) Follow Clean all accumulated foreign material
from the Crack Saw utilizing an appropriate safety
solvent.
CAUTION
Observe all applicable safety precautions for the
solvent.
2) Follow the procedure as outlined in the material
supplied by the engine manufacturer describing long
term storage for the engine.
3) Check all visible parts for wear, breakage or
damage. Order any part not required to make the
necessary repair. This will avoid a needless delay
when operating the Crack Saw at next use.
4) Apply a dry film lubricant to all exposed metal
components to prevent rust.
5) Store the Crack Saw inside. If the Crack Saw
must be stored outside, protect it with a suitable
covering.