Filter
Top Products
STOW CUTTER 3 CE SAW — PARTS & OPERATION MANUAL — REV. #5 (09/22/06) — PAGE 21
STOW CUTTER 3 CE SAW — INSPECTION - BLADE PLACEMENT
NOITCELESEDALBDNAGNITSILLAIRETAM.5elbaT
lairetaMedalB
etercnoCderuCedalBetercnoCderuC
etercnoCneerGedalBetercnoCneerG
tlahpsAedalBtlahpsA
etercnoCrevotlahpsAedalB
etercnoC/tlahpsA
seirotcarfeR,yrnosaM,kcirB,kcolBedalByrnosaM
enotS,cimareC,eliTedalBeliT
Diamond Blades
Selecting the diamond blade TYPE and GRADE defines how
the blade will perform both in cutting speed and blade life.
Selection of the proper diamond blade consists of:
z
Material to be Cut
z
Type of Saw Being Used
z
Horsepower of Saw
z
Hardness Characteristics of the Material
z
Performance Expectations
Factors for sawing economy:
z
Type of Blade
z
Depth of Cut
z
Sawing Speed
z
Characteristics of the Material Being Cut
Blade Speed
A diamond blade’s performance is directly connected to specific
peripheral (rim) speeds.
The following shaft rotational speeds have been factory set to
ensure optimum blade performance.
z
Cutter 3 CE - 508 mm. (20”) Capacity - 2800 RPM.
Operating saw blades at rotational
speeds greater than those specified by
the manufacturer can cause blade dam-
age, and may injure the user or others in
the operating area.
WARNINGWARNING
WARNINGWARNING
WARNING
Failure to thoroughly inspect the diamond
blade for operational safety could result in
damage to the blades or the saw and may
cause injury to the user or others in the
operating area.
BLADE PLACEMENT
D
WARNINGWARNING
WARNINGWARNING
WARNING