Filter
Top Products
8
Channel and Tube Installation
Figure 11. Install Channel Assembly
A. Channel Assembly
B. Hitch
C. Pin
C
B
A
INSTALL CHANNEL ASSEMBLY AND “U”-TUBE
1. Slide the channel assembly (A, Figure 11) into hitch
(B) as shown.
2. Install the pin (C) into the right side of hitch (B) and
turn pin (C) counterclockwise to lock in place.
3. Install the “u”-tube (A, Figure 12) to channel
assembly (B) securing with 5/16-24 screws (C), 5/16
lockwashers (D) and 5/16-24 nuts (E).
A
Figure 12. Install “U”-Tube
A. “U”-Tube
B. Channel Assembly
C. Screws, Special, 5/16-24
D. Lockwashers
E. Nuts, 5/16-24
E
C
D
D
B
Figure 13. Install Center Tube and End Caps
A. Center Tube
B. Channel Assembly
C. Lockwashers, 5/16
D. Nuts, 5/16-24
E. Screw, Special, 5/16-24
F. Tube Ends
G. End Caps
F
G
F
G
E
D
C
C
A
B
INSTALL TUBES AND END PLUGS
1. Install the center tube (A, Figure 13) to RH side of
channel assembly (B) as shown. Secure with 5/16-
24 screws, 5/16 lockwashers (C) and 5/16-24 nuts
(D).
2. Install the end caps (G) to tube ends (F) as shown.