Filter
Top Products
5
Lift Lever Kit Installation Instructions
A
B
C
D
E
Figure 10. Install Assist Spring
A. Capscrew, 5/16-18 x 4-1/2
B. Retainer
C. 5/16 Speed Nut
D. Spring
E. Small Hole and Notch in Lift Link
Install Assist Spring
1. Assemble the spring (D, Figure 10), speed nut (C),
retainer (B), and 5/16-18 x 4-1/2 capscrew (A).
2. Hook the back of the spring (D) into the small hole
and notch (E) in the the lift link.
A
Figure 11. Manual Lift Assist Bolt
A. Adjustment Bolt
3. Route the capscrew (A, Figure 11) through the notch
in the frame, and tighten until it remains in position.
After the attachment is installed, tighten until desired
assist is achieved.