Filter
Top Products
13. Install the new baffle (A, figure 8) in deck on
stone guard using existing hardware. Hardware
may be installed with nut to inside or nut to
outside.
14. On new arbor cover, install on top of weld
bolt
(A,
figure 9) the largest washer (B
l-i/Z”
O.D.),
l/2’
spacer (C), lo&washer(D), and nut (Q as shown in
figures.
(Largeflatwasher(F) shownwillbeinstalled
in next step).
15. On
2-l/2” idler cover bolt, install
beit
cover to deck
reusing front taptite screw (G) removed in step 1.
Install flat washer (I) and flange nut
(J,
removed in
step 4) to secure belt cover. Tighten flat washer and
flange nut (H) loosened in step 1.
H&k
8&fle
Over Stone Guard
6
‘igure 8.
a Baffle
s.
Carriage Bolt
C. Mower Discharge Opening
Figure 9.
A.
Weld Bolt
8. Large Washer,
I-112”
O.D.
C. Spacer,
112”
D.
Lockwasher
E. Nut
F. Large Washer
0. Taptite
Screw
H. Center Hardware
I.
Flat Washer
J. Flange Nut
11