Shindaiwa DG150MI Portable Generator User Manual


 
- 38 -
Reassemble it back
The fuel strainer in DG150MI has the water separating feature as well.
When the float (red) in the strainer comes up by 20mm from the bottom, drain the water
<Caution>
Be sure to check for any contaminants on the O-ring,
whenever reinstalling the cup
Open the fuel line valve to OPEN after assembling, and
check for any leak
When you replace the filter element, be sure to replace an
O-ring as well
Model ISUZU Part No.
DG150MI 8943602540
DG250MI 8970713480
10.5 Draining Water from Fuel Tank
Drain water Every 200 hours
Unscrew the Fuel drain plug and turn the drain lever on the tank to OPEN
Reinstall the drain plug, after draining water fully and
restore the drain lever to CLOSE
<Caution>
Ensure always that the drain lever on the tank is kept CLOSE
after draining water
10.6 Changing Coolant / Water
Replace Every 2 years or 400 hours
Remove the radiator cap
Loosen the water drain plug
After draining all the water, reinstall the water drain plug
Loosen the fastener that holds the reservoir tank, and drain
all the water
<Caution>
With respect to DG150MI, check and add water, after unscrewing
the bolt holding the radiator cap cover