Filter
Top Products
31
XL-UH2080H
Advanced Features
Timer playback
Before setting timer:
Advanced Features
1 Check that the clock is set to the correct time (refer to page 13).
If it is not set, you cannot use the timer function.
2 For timer playback: Load disc to be played.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the or button to
select “ONCE” or “DAILY”, and press the MEMORY button.
Set the clock to the correct time if “ONCE” or “DAILY” does not
appear.
4 Within 10 seconds, press the or button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
5 Press the or button to adjust the hour and
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
6 Press the or button to adjust the minutes and
then press the MEMORY button.
7 Set the time to finish as in steps 5 and 6 above.
8 Switch input with the or button, and then
press the MEMORY button.
To select the timer playback source: CD, TUNER, USB or
AUDIO IN.
z When you select the tuner, select a station by pressing the
or button, and then press the MEMORY
button.
z If a station has not been programmed, “NO PRESET” will be
displayed and timer setting will be cancelled.