Filter
Top Products
18
XL-UH2080H
CD or MP3/WMA disc Playback
Advanced CD or MP3/WMA disc
playback (continued)
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or button.
MP3/WMA folder programmed:
Only tracks in the same folder can be select. Select which folder to
be progammed before entering programme mode. (refer page 20 to
select folder)
Notes:
z When a disc ejected, the programme is automatically cancelled.
z Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
z During the programme operation, random play is not possible.
MP3/WMA folder mode (only for
MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download the music files.
You can then play back these downloaded music files by burning
them to a CD-R/RW disc.
z Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
About folder playback order
If MP3/WMA files are recorded in several folders, a folder number will
be set to each folder automatically.
These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the folder is skipped and the next folder will be selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.
z The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that
this unit will playback the files not according to our expected
playback order.
z For CD MP3/WMA, 512 numbers of folders and files inclusives of
the folders which have non playable files can be read.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control whilst the “MEMORY”
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
1. ROOT folder is set as folder 1.
2. As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2
and folder 3.
3. As for folder inside Folder A (Folder C and Folder D), the folder
which is recorded earlier on the disc will be set as folder 4 and
folder 5.
4. Folder E that is inside Folder D will be set as folder 6.