Filter
Top Products
22
XL-UH2080H
USB Memory Playback
To remove USB memory device
Notes:
z
SHARP will not be held liable for the loss of data whilst the USB memory device is con-
nected to the audio system.
z
Files compressed in MP3 and / or WMA format can be played back when connected to
the USB terminal.
z
This USB memory’s format supports FAT 16 or FAT 32.
z
SHARP cannot guarantee that all USB memory devices will work on this audio system.
z
USB cable is not recommended for use in this audio system to connect to USB memory
device. Use of the USB cable will affect the performance of this audio system.
z
This USB memory cannot be operated via USB hub.
z
The USB terminal in this unit is not intended for a PC connection but is used for music
streaming with a USB memory device.
z
External HDD-storage cannot be played back via USB terminal.
z
If the data inside the USB memory is large, it may take longer time for the data to be
read.
z
This product can play WMA and MP3 files. It will automatically detect the file type being
played. If unplayable file is played on this product, “NO SUPPORT” is indicated and the
file will be automatically skipped. This will take a few seconds. If abnormal indications
appear on the display due to the unspecified file, turn off the unit and then turn it on
again.
z
This product relates to USB mass storage devices and MP3 players.It may however face
some irregularities due to various unforeseen reasons from some devices. Should this
happen, turn off the unit and then turn it on again.
z
The USB port is intended for direct connection to a USB memory device without any
cable.
Advanced USB playback
Repeat play
Repeat play can play all tracks sequence continuously.
To cancel repeat play:
Press the PLAY MODE button again until “ ” will disappear.
Random play
The tracks can be played in random order automatically.
To cancel random play:
Press the PLAY MODE button.
“R” will disappear.
Notes:
z If you press the button during random play, you can move to
the track selected next by the random operation. On the other
hand, the button does not allow you to move to the previous
track. The beginning of the track being played will be located.
z In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
1 Press the USB button to stop playback. Then press the
USB button again and wait until “UNPLUG OK” is
displayed.
Always remove the USB memory device after “UNPLUG OK” appears
on the display. Improper removal of the USB memory device may
cause irregularities such as continuous appearance of “READING
FILES”. Should this happen, turn off the unit and then turn it on again.
2 Disconnect USB memory device from the USB terminal.
To repeat all tracks:
Press the PLAY MODE button.
Press the /
button.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control.
Press the /
button.
PLAYMODE