Filter
Top Products
OPERATION
Turbo 120 01/11 Operation Section 4-23
© 2011 Alamo Group Inc.
OPERATION
• Lift Type-Ensure the tailwheel beam position
support bolts are properly installed and
tightened.
• Pull and Semi-Mount Type-Ensure that the
tailwheel ratchet or hydraulic cylinder is
installed and retained correctly to provide the
desired cutting height.
• Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_F
• Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, lowered,
and in good condition.
• Ensure the driveline integral shield is in good
condition and rotates freely.
• Ensure the driveline slip clutch (if equipped) is
properly adjusted. OPS-R-0039
• Perform scheduled lubrication as specified in
the maintenance section.
• Inspect each gearbox oil level using dipstick
level indicator and replenish if needed. A low
oil level is a warning sign that the gearbox may
be cracked or its seal is damaged and needs to
be replaced.
• Ensure all gearbox vents are in place and free
from clogs. OPS-R-0011_F