Filter
Top Products
ASSEMBLY
Turbo120 01/11 Assembly Section 3-8
© 2011 Alamo Group Inc.
ASSEMBLY
FRONT AND REAR DEFLECTORS (Standard Equip.) CHAINGUARDS
(Optional Equip. at Extra Cost)
CHAINGUARDS: Front and Rear Chainguards (Optional Equipment) are recommended for higher than normal
usage (100 hours or more per year) and will provide protection from thrown objects with careful operation.
Chainguards must be maintained in good repair by replacing missing or worn sections or by being replaced
when seriously worn or damaged. Figure Asm-R-0295 & Asm-R-0296.
Front Chainguard - (FIGURE Asm-R-0295)
Attach the right and left Chainguard
assemblies (1) to the mower with 1/2” x 1-1/4”
bolts(2), Lockwashers (4), and Flatwashers
(3). Then attach Chainguard Brackets, left (10)
and right (9) to mower with 1/2” x 1-1/4” Bolts
(2). Flatwashers (3), and Locknuts (4). Fasten
the chain links (5) and (6) to the guards by
inserting the rod (8) through the links and
retaining them with cable stop (7).
Rear Chainguard- (FIGURE Asm-R-0296)
Attach the right and left Chainguard assemblies
91) to the mower with 1/2” x 1-1/4” Bolts (2),
Flatwashers (3), and Locknuts (4). Fasten the
chain links (5) to the guard by inserting the rod
(6) through the links and bending the ends.