Filter
Top Products
INTRODUCTION
CY72 01/08 Introduction Section 2-2
© 2008 Alamo Group Inc.
INTRODUCTION
This Rotary Cutter is designed with care and built with quality materials by skilled workers. Proper assembly,
maintenance, and operating practices, as described in this manual, will help the owner/operator get years of
satisfactory service from the machine.
The purpose of this manual is to familiarize, instruct, and train. The Assembly Section instructs the owner/
operator in the correct assembly of the Cutter using standard and optional equipment. The Parts Listing
section is designed to familiarize the owner/operator with replaceable parts on the Cutter. This section
provides exploded assembly drawings of each Cutter component illustrating each piece and the corresponding
part number.
Careful use and timely service saves extensive repairs and costly downtime losses. The Operations and
Maintenance sections of the manual trains the owner/operator how to work the Cutter correctly and attend to
appropriate maintenance. The Trouble-Shooting Guide helps diagnose difficulties with the Cutter and offers
solutions to the problems.
Safety is of primary importance to the owner/operator and to the manufacturer. The first section of this manual
includes a list of Safety Messages, that, if followed, will help protect the operator and bystanders from injury or
death. Many of the Safety Messages will be repeated throughout the manual. The owner/operator/dealer
should know these Safety Messages before assembly and be aware of the hazards of operating this blade
during assembly, use, and maintenance. The Safety Alert Symbol combined with a Signal Word, as seen
below, is intended to warn the owner/operator of impending hazards and the degree of possible injury faced
when operating this machine.
Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR
VERY SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH
OR SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result in
damage to, or destruction of the machine, attachments or the environment.