Servis-Rhino CY72 Brush Cutter User Manual


 
OPERATION
CY72 01/08 Operation Section 4-42
© 2008 Alamo Group Inc.
OPERATION
Gearbox Leaking Damaged Oil Seal. Replace Seal.
No Oil Seal. Install Oil Seal.
Oil too light. Use NLGI-000 Grease, or
Mobilux EP023, or Gulf EP023, or
Sun 740-A EP Grease.
Bent Shaft. Replace Oil Seal and Shaft.
Oil Seal Race rough. Replace Shaft or repair Race.
Oil Seal installed wrong. Replace Seal.
Oil Seal not sealing in the housing. Replace Seal or use a sealant on O.D.
of Seal.
Bearings loose. Adjust Bearings.
Vent Plug stopped up. Open Vent Plug.
Oil level too high. Drain oil to proper level.
Gasket damaged. Replace Gasket.
Bolts loose. Tighten Bolts.
Driveline Integral Shields Install Shields deformed. Replace Shield.
Rattling or Not Turning Freely Nylon Bearing worn. Replace Nylon Bearing.