Filter
Top Products
SNOW THROWER COMPONENTS
Please familiarize yourself with the locations and functions of the various components
and controls of the snow thrower.
2
3
4
\
5
t0
\
7 (internal)
(1) Drive Control- Drives the snow thrower at the
pre-selected speed and direction when depressed.
(2) Handle- Hold the snow thrower here when using.
(3) Auger Control- Rotates the auger when
depressed.
(4) Drive Speed Control- Sets the speed and
direction of the snow thrower.
(5) Chute Rotation Handle- Use to adjust throwing
direction of snow exhausted from the chute.
(6) Wheel Traction Drive Lock- Pin that locks the
wheel into the automatic drive system.
(7) Impeller- Spinniug mechanisln that works to propel
snow out the chute.
(8) Auger Shield- A shroud that covers the auger. This
is the intake point for the snow.
(9) Adjustable Skid Shoes- Control the height of the
auger and auger shield from the ground.
(10) Auger- Spinning mechanism that intakes snow into
the snow thrower.
(11) Chute- Exit shaft of shoveled snow.
(12) Engine- Provides power to the snow thrower (see
engine components on next page).