Filter
Top Products
OPERATION
_ Before starting the snow thrower, make sure you have read and performed the
steps in the "Preparing the Snow Thrower for Use" section of this manual. If you are
unsure about how to perform any of the steps in this manual please call (888) 315-
3080 M-F 8-5 CT for customer service.
Starting the Snow Thrower
To start up the snow thrower, perform the following steps:
1. Turn the engine fuel valve lever to the "on" position (see figure 8).
2. Move the choke lever to the closed position as shown in figure 7 (NOTE: If you
have just been using the snow thrower and the engine is still warm, keep the
choke in the "open" position).
3. Move the engine throttle lever to the last position (see figure 8).
4. Move the engine switch to the "on" position as shown in figure 9.
CHOKE
Figure 8 Engine lever positions
ENGINE SWITCH
ON
Figure 9- Engine switch positions
16