Filter
Top Products
Removing Mower - Page 44
REMOVING MOWER
Removing Mower
Removing Mower
1. STOP engine, LOCK park brake, DISENGAGE PTO
lever, turn key to the OFF position, and remove key.
2. Raise mower lift lever to highest position.
3. Put wood blocks under each side of mower.
4. Lower mower lift lever to lowest position, bringing deck
down onto blocks.
5. Remove mower deck drive belt from tractor engine
pulley.
6. Remove spring locking pin and washer (A) holding
tension rod (B) to blade drive arm (C).
7. Remove spring locking pins and washers (D) from front
draft rods (E) and remove draft arms from front axle
brackets. Store draft arms with mower.
8. Remove spring locking pins and rear draft pins (F), one
on each side, from rear draft brackets (G).
9. Raise mower deck lift lever to highest position and
remove wood blocks.
10.Pull deck out from under tractor.
c CAUTION: Avoid injury. Before removing
mower on machine: STOP engine. Remove key.
Wait for all moving parts to STOP.
• Mower lift lever under tension. To avoid injury,
grasp lift lever securely and release lock slowly.
B
A
C
A
C
B
E
E
D
D
GF