Service Machine Safely - Page 21
SERVICE MACHINE SAFELY
Service Machine Safely
Practice Safe Maintenance
• Understand service procedure before doing work. Keep
area clean and dry.
• Never lubricate, service, or adjust machine while it is
moving. Keep safety devices in place and in working
condition. Keep hardware tight.
• To prevent them from getting caught, keep hands, feet,
clothing, jewelry, and long hair away from any moving parts.
• Before servicing machine, disengage all power and stop
the engine. Lock park brake and remove the key. Let
engine cool.
• Securely support any machine elements that must be
raised for service work.
• Keep all parts in good condition and properly installed.
Fix damage immediately. Replace worn or broken parts.
Remove any buildup of grease, oil, or debris.
• Disconnect battery ground cable (-) before making
adjustments on electrical systems or welding on machine.
• Unauthorized modifications to the machine may impair
its function and safety.
Wear Appropriate Clothing
• Wear close fitting clothing and safety equipment
appropriate for the job.
• Loud noise can cause impairment or loss of hearing,
wear a suitable protective device such as earplugs.
• Do not wear radio or music headphones while servicing
the machine. Safe service requires your full attention.
Avoid Injury From Contacting Blades
Before you unplug or adjust machine:
• STOP the engine.
• Remove key.
• Wait for blades to STOP.
• Keep hands, feet and clothing away from blades when
engine is running.
Handling Waste Product and Chemicals
• Waste products such as used oil, fuel, coolant, brake
fluid, and batteries, can harm the environment and people.
• DO NOT use beverage containers for waste fluids -
someone may drink from them.
• See your local Recycling Center or John Deere dealer to
learn how to recycle or get rid of waste products.
• A Material Safety Data Sheet (MSDS) provides specific
details on chemical products: physical and health hazards,
safety procedures, and emergency response techniques.
See your John Deere dealer for the MSDS on chemical
products used with your machine.