Filter
Top Products
6
3. Warning labels on the machine
English
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: AIR CLEANER COVER
(c) The direction to open the choke
Position: AIR CLEANER COVER
(d) If you turn the rod by screwdriver follow the arrow to
the "MAX" position, the chain oil flow more, and if
you turn to the "MIN" position, less.
Position: Bottom of the power unit
IMPORTANT ENGINE INFORMATION
THIS ENGINE MEETS U.S. EPA PH2 AND 2005
CALIFORNIA EMISSION REGULATIONS FOR SI
SORE’s. COMPLIANCE PERIOD : CATEGORY A
ENGINE FAMILY : 5KZXS.0244XY ; EM
ENGINE DISPLACEMENT : 24cc
REFER TO OWNER’S MANUAL FOR MAINTE-
NANCE SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
MADE IN JAPAN
■ EMISSION CONTROL
An emission control label is located on the engine.
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Warning/Attention
(4) Keep all children, bystanders and helpers 15
meters away from the brushcutter
If warning label peel off or become soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels
and affix them in the required location(s).
Never modify your brushcutter.
We won't warrant the machine, if you use the
remodeled brushcutter or you don't observe the
proper usage written in the manual.
WARNING
IMPORTANT
4. Symbols on the machine