Filter
Top Products
Model 880 Series Quick Start Guide 28
3. In the Instrument Files area, locate and select the file or folder you want to copy as
follows.
4. In the Look in box, click the down arrow and select the medium where the file is
located. Select tffs0 for the generator’s flash memory or card0 for the generator’s
PC card.
5. In the list of files, select the file or folder you want to copy.
6. In the Host Files area, open the destination folder where you want to copy the files.
7. In the Instrument Files area, click Upload. The Transfer Files dialog box appears.
Verify that the source file or folder and the destination folder are correct, and then
click OK.
The Copying Files dialog box appears showing the status of the operation. When the
status is 100%, click Done.
Copying Files with the Generator FTP Browser