Filter
Top Products
Model 880 Series Quick Start Guide 16
Displaying images
Use the following procedures to view primary images. Once you have selected an image
you can modify the image options if necessary.
To select an image:
1. Identify the type of display (CRT or FPD) and the images that are used for testing
this type of display (see the table below).
2. Press the Content key. A list of images appears on the generator’s display as
shown below. Press the + and - keys to see all of the images.
The list of images that appear when you press the Content key will be the images in
the Image folder of the media storage location that you have set the image path
parameter to using the Browse mode or the command line (IMGP parameter).
3. Choose an image by pressing the adjacent soft key.
The table below provides a summary of analog CRT display characteristics and the
images used to evaluate them. For details on the images and display attributes, see
Appendix B, “Image Reference” of the User's Guide.
epytyalpsiDyalpsiD
citsiretcarahc
egamI
TRCgolanAdnanip(yrtemoeG
)ytiraenil,lerrab
-1_moeG,LselcriC)02,61hctaH,hctaHVT(hctaH:segamicitatS
.331ETPMS,5-moeG
sucoF.segamitxeTdnasucoF
yrtemotohP
)slevel,ecnanimorhc(
.raBVT,raBETPMS,raBroloC,pmaR,talF
ecnan
imuL.)46,23,61,11,9,5(syarG331ETPMS
noitcerrocammaG.)xobrekcehc(331ETPMS
noituloseR .)44,33,22,51,11(llirG
,)ylnostamrofVT(tsruB,ECTtsruB
)VTDSEC(esluP.raBesluP
gniretneC.)3,2,1,0(eniltuO
noitalugeRegatloV.etalugeR
citengamortcelE
ecnerefretnI
.)5,4,3,2,1(tseTIME
Displaying Images