Filter
Top Products
Model 880 Series Quick Start Guide 22
To return to the Network Connection screen without saving the changes, choose the
Back item.
8. Reboot the generator to enable the IP address change.
Setting the server's IP address in the generator
You must enter the IP address of the file server in each generator so the generator can
communicate with the file server. In addition, you can also enter a name (called the
Server Name) for the file server.
To specify the IP address and host name of the file server:
1. Press the Tools key. The Tools menu appears on the generator’s display as shown
below.
2. Choose the System item by pressing the adjacent soft key. The System menu
appears on the generator’s display as shown below.
3. Choose the Server item by pressing the adjacent soft key. The host name and IP
address appear on the generator’s display.
4. Press the Settings key. The Network Server (Server IP address) screen appears on
the generator’s display as shown below.
If the Server Address (IP address) configuration option is not visible, press the soft
key adjacent to the arrow symbol by Server Name until Server Address (IP address)
appears.
5. Change the Server address as follows:
Setting the Server's IP Address