Filter
Top Products
Model 880 Series Quick Start Guide 12
Video Display Testing Procedures
This section provides an overview of the video testing process, which involves connect-
ing the generator to the display under test, selecting the interface and format appropri-
ate for the display, and then selecting images to exercise the display to ensure proper
functioning.
Making physical connections
Use the following table as a guide for connecting the generator to the display under
test. First identify the Signal type and determine the Port (Interface). Then select the
cable.
epytyalpsiDepytlangiS)ecafretnI(troPelbaC
noitamrofnI
)TI(ygolonhceT
ASEV-retupmoC
)TVC,TMD(
tnenopmoCgolanA
BGR
TUOAGVAGVotAGV
ASEV-retupmoC
)GWDD(
tnen
opmoClatigiD
BGR
TUOIMDHIVDotIMDH
remusnoC
)EC(tnempiuqE
6-074-UTI-VTDS
dnabesab
etisopmoCgolanA
SBVC
SBVC57ACRo
tCNB
smhO
6-074-UTI-VTDS
dnabesab
etisopmoCgolanA
OEDIV-S
OEDIV-S)niDinim(oediV-S
B168-AEC-VTDStnenopmoCgolanA
rPbPY
TUOAGVACRotAGV
liava-lanoitpo(
IDQmorf
B168-AEC-VTDHtnenopmoClatigiD
BGRIVD
TUOIMDHIVDotIMDH
B168-AEC-VTD
HtnenopmoclatigiD
dnaBGRIMDH
rCbCY
TUOIMDHIMDHotIMDH
VAlanoisseforP)M952-ETPMS(IDS
IDS-DHdna
)C-M292-ETPMS(
tne
nopmoclatigiD
rCbCY
IDS-DH/IDSxaoCCNB
Selecting the device type and interface
After making the physical connections, you are ready to select the device type and
interface. If you are testing video displays, you will select Display as the device type
using the front panel keys.
You can select the interface using either the front panel keys or the command line
interface. The interface you specify will depend on the video display type you are testing.
It will be one of the following: