Filter
Top Products
9
SCALPING -- The scalping technique re-
moves unwanted vegetationdown to the
ground. Hold the bot tom of the trimmer head
about 3 inches (8 cm) above the ground and
atanangle.Allowthetipofthe lineto strikethe
ground around trees, posts, monuments, et c.
This technique increases line wear.
MOWING -- Your trimmer is ideal for mowing
in places conventional lawn mower s cannot
reach. I n the mowing position, keep the line
parallel to the ground. Avoid pressing the
head into the ground as this can scalp the
ground and damage the tool.
SWEEPING -- Thefanning action ofthe r otat-
ing line can be used for a quick and easy
clean up. Keep the line parallelto and above
the surface s being swept and move the tool
from side to side.
MAINTENANCE
WARNING: Disconnect t he spark
plug before performing maintenance except
for carburetor adjustments.
HELPFUL TIP
IMPORTANT: Have all
repairs other than the rec-
ommended maintenance
described in theinstruction
manual performed by an
authorized service dealer.
If any dea ler other than an authorized
service dealer performs work o n the
product, Poulan/WEED EATER may
not pay for repairs under warranty. It is
your responsibilit y to maintain and per-
form general maintenance.
CHECK FOR LO OSE
FASTENERS AND PARTS
S Spark P lug Boot
S Air Filter
S Housing Screws
S Assist Handle Screws
S Debris Shield
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for re-
placement of damaged or worn parts.
S STOP Switch -- Ensure STOP switch func-
tions proper ly by pushing and holding the
switch inthe S TOP position. Make sure en-
gine stops. Restart engine and continue.
S Fuel Tank -- Discontinue use of unit if fuel
tank shows signs of damage or leaks.
S Debris Shield -- Discontinue use of unit if
debris shield is damaged.
INSPECT AND CLEAN UNIT AND
LABELS
S After each use, inspect comple te unit for
loose or damaged part s. Clean the unit and
labels usi ng a damp cloth wi th a mild de ter-
gent.
S Wipe off unit with a clean dry cloth.
CLEAN AIR FILTER
A dirty air filter decreases engine perform-
ance and increases fuel consumption and
harmful emissions. Always clean after every
5 hours of operation.
1. Clean the air filter cover and the area
around it to keep dirt from falling int o the
carburetor chamber when the cover is
opened.
2. Open air filter cove r by pushing button
(see illustration). Remove air filter.
NOTE: To avoid creating a fire hazar d or
producingharmful evaporativeemissions,do
not clean filter in gasoline or other flammable
solvent.
3. Wash the filter in soap and water .
4. Allow filter to dry.
5. Replace air filter and close cover.