Filter
Top Products
15
S
Direct material discharge away from glass
enclosures, automobiles, etc.
S
Do not run engine at high speed while not
removing snow.
S
Be attentive when using the snowthrower ,
and stay alert for ho les in t he terrain andother
hidden hazards.
S
Ma ke sure the ro tor will spin f r eely befor e
attaching the snowthrower to the powerhead.
S
Iftherotorwill notrotatefreelyduetofrozen
ice, thaw the unit before thoroughly before
attempting to operate under power.
S
Keep the rotor clear of debris.
S
Do not throw snow near other people. The
snow thrower could propel small objects at
high speed causing injury.
S
After striking a foreign object, stop the
engine, disconnect spark plug and inspect
the snowthrower for damage and repair if
necessary before restarting unit.
S
Never operate thesnowthrower nearglass
enclosures, automobiles and trucks.
S
Never attemptto use thesnowthrowerona
roof.
S
Never operate t he s nowthrower near
window wells, dropoffs, etc.
S
Never dischargesnow ontopublic roads or
near moving traffic.
S
Clear snow from slopes by going up and
down; never across. Use caution when
changing directions. Never clear snow
from steep slopes.
S
Letsnowthrowerrunfor afew minutes after
clearing snow so moving parts do not
freeze.
S
Look behind and use care when backing up.
Exerc ise cau tion to avoid s lipp ing or f allin g,
especially when operating in reverse.
S
Know how to stop quickly.
MAINTENANCE
W ARNING:
Disconnect the spark
plug before performing maintenance except
for carburetor adjustments.
HELPFUL TIP
IMPORTANT:
Have all
repairs other than the rec-
ommended maintenance
described in the instruction
manual performed by an
authorized service dealer.
If any dealer other than an authorized
service dealer performs work on the
product, Electrolux Home Products,
Inc., may not pay for r epairs underwar-
ranty. Itis yourresponsibility tomaintain
and perform general maintenance.
CHECK FOR LOOSE
FASTENERS AND PARTS
S
Spark Plug Boot
S
Air Filter
S
Housing Screws
S
Assist Handle Screw
S
Debris Shield
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for re-
placement of damaged or worn parts.
S
ON/OFF Switch -- Ensure ON/OFF switch
functions properly by moving the switch to
the OFF position. Make sure engine stops;
then restart engine and continue.
S
Fuel Tank -- Discontinue use of unit if fuel
tank shows signs of damage or leaks.
S
Debris Shield -- Discontinue use of unit if
debris shield is damaged.
INSPECTANDCLEANUNIT ANDDE-
CALS
S
After each use, inspect complete unit for
loose o rdamagedparts. Clean theunitand
decals using adampcloth with amild deter -
gent.
S
Wipe of f unit with a clean dry cloth.
CLEAN AIR FILTER
A dirty air f ilter decreases engine perform-
ance and increases fuel consumption and
harmful emissions. Always clean after every
5 hours of operation.
1. Clean thecover andthe areaaround it to
keep dirt from falling into the carburetor
chamber when the cover is removed.
2. Remove parts by pressing button to re-
lease air filter cover.
NOTE:
To avoid creating a fire haz ard or
producing harmful evaporative emissions, do
not clean filter in gasoline or other flammable
solvent.
3. Wash the filter in soap and water.
4. Allow filter to dry.
5. Replace parts.
Air Filter
Air Filter
Cover
Button
INSPECT MUFFLER AND SPARK
ARRESTING SCREEN
W ARNING:
The muffler onthis prod-
uct contains chemicals known to the State of
California to cause cancer.
As your unit is used,carbon deposits buildup
onthe m uffler andspark arrestingscreenand
must be removedto avoidcreating afire haz-
ard or affecting engine performance.
For normal homeowner use, the muffler and
spark arresting screen will not r equire any
service. After 50 hours of use, we recom-
mend that your muffler be serviced or re-
placed by an authorized service dealer.