Filter
Top Products
7
FIG. 5
02
051
A
NOTE: Be sure mower side suspension arms (A) are
pointing forward before sliding mower under tractor.
• Slide mower under tractor until it is centered under
tractor.
• FIRST INSTALL ANTI-SWAY BAR (S).
- From right side of mower, insert anti-sway bar
into hole in transmission bracket (T).
02995
S
T
A
FIG. 6
- Pivot bar towards you and insert other end of bar
into hole in rear mower bracket (D). Move mower
as needed to insert bar.
- Secure with washer and retainer spring as shown
using small 5/16 retainer spring.
02996
D
FIG. 7
• ATTACH MOWER SIDE SUSPENSION ARMS (A)
TO CHASSIS - Position hole in arm over pin (B) on
outside of tractor chassis and secure with washer
and retainer spring.
• Repeat on opposite side of tractor.
A
B
FIG. 8
• ATTACH REAR LIFT LINKS (C) - Insert rod end
of lift link assembly into hole in tractor lift shaft
suspension arm (L) and pivot link down to mower.
Lift rear corner of mower and position slot in link
assembly over pin on rear mower bracket (D) and
secure with washer and retainer spring.
• Repeat on opposite side of tractor.
FIG. 9
C
D
L
ASSEMBLY