Filter
Top Products
17
IntelliChlor User’s Guide
Pool Water Preparation
Determining Pool Size (m3 of Water in Your Pool)
• Rectangular Pools: Length x width (meters) x average depth x 1000
• Circular Pools: Diameter x diameter x average depth x 785
• Oval Pools: Length x width (meters) x average depth x 893
• Sloping Sides: Multiply total m3 by 0.85 = m3 capacity.
Determining Pool Size (Gallons of Water in Your Pool)
• Rectangular Pools: Length x width x average depth x 7.5
• Circular Pools: Diameter x diameter x average depth x 5.9
• Oval Pools: Length x width x average depth x 6.7
• Sloping Sides: Multiply total gallons by 0.85 = gallon capacity
CAUTION: Never use dry acid to adjust pH in arid geographic areas with excessive evaporation and minimal
dilution of pool water with fresh water. A build-up of byproducts can damage the electrolytic cell.
IntelliChlor Pass-Through Cell
After new pool construction has been completed, in order to prevent debris from entering the IntelliChlor
cell assembly, it is recommended that the IntelliChlor pass-through cell (P/N 520588) be installed before
installing the IntelliChlor cell. After the pool system has flushed the debris from the pipes, remove the
pass-through cell and install the IntelliChlor cell.