Filter
Top Products
PAGE18 — SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09)
INTENDED USE
Operate the SP7060 Multiquip Saw, tools and components
in accordance with the manufacturer’s instructions. Use of
any other tools for stated operation is considered contrary
to designated use. The risk of such use lies entirely with
the user. The manufacturer cannot be held liable for damages
as a result of misuse.
ENGINE
The SP7060 saw is classified in the industry as a “high”
powered saw. This classification is particularly useful when
selecting the proper cutting tool (blade) for an application.
The SP7060 saw is powered by a liquid cooled, 3 cylnder,
turbocharged diesel engine rated at 60.2 HP (44.9 kW) at
3,000 RPM. Blade rotation is belt driven. Wheel Drive
system is driven by a hydrostatic transmission consisting
of a variable displacement pump and two fixed displacement
wheel motors.
Refer to the Engine Owner’s Manual for specific
instructions regarding engine operation and maintenance
practices.
WATER SYSTEM
All SP7060 saws provide a hardy water plumbing system
that evenly distributes water volume and optimum flow rate
to both sides of the blade to keep it cool when cutting. The
basic water system provides a valve that connects to a
standard garden hose. The water is delivered (via a hose)
to the saw blade.
All MULTIQUIP SP7060 saws are designed, engineered
and manufactured with strict adherence to American
National Standards Institute, Inc. (ANSI) guidelines B7.1
and B7.5.
INTENDED USE / FAMILIARIZATION
FEATURES
Stay-level handlebar system adjusts handlebar angle
automatically.
Engine stop switch conveniently located on operator’s
control panel.
Console mounted with vibration control system.
Chassis cold-formed welded box construction.
Pressurized oil bath lubrication (blade shaft bearings).
Oil bath design, fully enclosed housing.
Quick disconnect blade flange system; inner flanges
mounted to shaft.
Blade mounting left side or right side.
Saw position guide helps ensure straight cuts
Dual water lines directly deliver water to blade.
Slip-on, tapered mount blade guard for ease of removal
and installation.
Blade raise-lower by electro-hydraulic pump.
Belt drive tension automatically controlled by hydraulic
tensioning system.
Dual filter element air filter with integral turbo pre-cleaner.
Hydro-gear hydrostatic transmission pump.
Hydro-gear hydrostatic wheel motors.
Travel speed up to 84 MPM (meters per minute)/ 275
FPM.
Automatic actuating parking brake.
Optional night light.