Filter
Top Products
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 29
MAINTENANCE
TroubleshootingTable 6.
SYMPTOM POSSIBLE PROBLEM SOLUTION
Lamp does not light.
Is plug disconnected? Plug in correctly.
Is generator power switched off? Turn on switch.
Is lamp loose? Screw lamp securely into socket.
Is power connector disconnected or
loose?
Connect disconnected connector.
Are any other electric appliances
(other than light tower) plugged into
power source?
Unplug all other appliances.
Is model of lamp incompatible? Use genuine MQ lamp.
Is lamp not cool enough to light
again? (Interval of 5 to 10 minutes
is required before turning on lamp
again)
Wait for lamp to cool down.
Lamp only lights for a short time.
Is ambient temperature too high
(more than 104° F (40° C)?
Move lamp where there is proper
ventilation.
Balloon does not infl ate.
Is fan motor (blower) not working
properly?
Check and repair fan motor (blower).
Is balloon envelope defective? Repair or replace balloon envelope.