Filter
Top Products
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 27
MAINTENANCE
Secure lamp holder on top of the lamp.7.
Reinstall lamp guard.8.
Pull down balloon and zip the bottom zipper to cover 9.
lamp.
REPLACING BALLOON
Unzip the top and bottom of the balloon. See 1.
Figure 40.
Unzipping BalloonFigure 40.
Slide out the old or worn balloon over the top of the 2.
lamp guard assembly. See Figure 41.
Removing Old BalloonFigure 41.
NOTICE
Do not use excessive force when screwing the lamp to
prevent lamp from breaking.
UNZIP TOPAND
BOTTOM ZIPPERS
BALLOON
REMOVE OLD
BALLOON
Slide in the new replacement balloon over the top of 3.
the lamp guard assembly. See Figure 42.
Replacing BalloonFigure 42.
Zip up the top and bottom of the new balloon. See 4.
Figure 43.
Zipping Up New BalloonFigure 43.
INSTALL NEW
BALLOON
ZIP UP
NEW BALLOON