Filter
Top Products
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 23
OPERATION
RAISING THE MAST (GBW/GBWE)
Raise the second mast to the desired height and tighten 1.
the T-bolt securely. See Figure 23.
Raising the Second MastFigure 23.
To raise the mast higher, raise the third mast until the 2.
lock/release tab pops out. The tab will automatically
rest on the second mast. See Figure 24.
Raising the Third MastFigure 24.
DANGER
ALWAYS make sure the area above
the lighting system is open and clear
of overhead power lines and other
obstructions. Contact with overhead
power lines or other obstructions could
result in equipment damage, electrical
shock, electrocution and even death.
CAUTION
When raising or lowering the mast, keep hands and
fi ngers clear of the mast sections to prevent hand and
fi ngers from getting pinched.
T-BOLT
SECOND
MAST
THIRD
MAST
LOCK/
RELEASE
TAB
LOWERING THE MAST (GBW/GBWE)
Loosen the T-bolt holding the second mast and push 1.
mast all the way down. Tighten T-bolt securely. See
Figure 25.
Lowering Second MastFigure 25.
Push the lock/release tab on the third mast to release 2.
it and lower third mast. See Figure 26.
Lowering Third MastFigure 26.
T-BOLT
SECOND
MAST
THIRD
MAST
LOCK/
RELEASE
TAB