Filter
Top Products
PAGE 52 — DCA-300SSK SERIES — PARTS AND OPERATION MANUAL (STD) — REV. #4 (03/27/06)
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel
mounting torque on the trailer. Be sure to use only the
fasteners matched to the cone angle of the wheel. Proper
procedure for attachment of the wheels is as follows:
1. Start all wheel lug nuts by hand.
2. Torque all lug nuts in sequence. See Figure 77. DO NOT
torque the wheel lug nuts all the way down. Tighten
each lug nut in 3 separate passes as defined by Table 17.
3. After first road use, retorque all lug nuts in sequence.
Check all wheel lug nuts periodically.
Figure 76. Wheel Lug Nuts Tightening Sequence
DCA-300SSK SERIES —TRAILER MAINTENANCE
stnemeriuqeReuqroTeriT.71elbaT
eziSleehWssaPtsriF
SBL-TF
ssaPdnoceS
SBL-TF
ssaPdrihT
SBL-TF
"2152-0204-5356-05
"3
152-0204-5356-05
"4152-0206-05021-09
"5152-0206-05021-09
"6152-0206-05021-09
NOTE
NEVER
use an pneumatic air
gun to tighten wheel lug nuts.
Use a
torque wrench
to tighten
lug nuts.