MTD OHD 190-180 Lawn Mower User Manual


 
3
1
Rider Model
Identification
FastAttach
Twin Bag
Grass Collector
The Model OEM-190-180 Twin Bag Grass Collector is a
grass collection system designed for use on all MTD 38”
& 42” cut FastAttach™ compatible lawn tractors (except
2001 Yard-Man Revolution/White Outdoor ZTT).
The instructions in this manual are divided into sections.
Carefully read all sections pertaining to your model of
rider, and study the illustrations to ensure proper installa-
tion and usage of this attachment. Read and observe all
WARNING, NOTES and IMPORTANT statements. They
are included to provide for the protection of the equip-
ment installer and user, and to ensure the prolonged
service life of the equipment.
NOTE: References to LEFT and RIGHT indicate the left
and right sides of the tractor when facing forward in the
operator’s position. Reference to the FRONT indicates
the grille end; to the REAR, the rear end of the rider.
Determine The Model
of Your Rider
Since this manual is designed for installation of your new
bagger on several different rider units, it is important
for you to determine which model of rider you have.
Therefore you will know which set of instructions in the
following pages to follow.
To determine which model of rider you have, you will
need to locate the rider’s model plate, located under the
seat. Simply flip the seat up and locate the model plate,
which will consist of an 11 digit/letter model number
and a serial number. For ease in this installation and
for future use, copy your rider’s model number & serial
number below now:
Rider Model Number:__ __ __ __ __ __ __ __ __ __ __
Rider Serial Number:_________________________
The 5
th
, 6
th
& 7
th
numbers from the left in your model
number determine your rider’s model series. See Figure
2.
When you fill in your model number in the space above,
the actual model series number should fall into the gray
shaded area.
Now that you have determined what model rider you are
attaching this grass bag collection system to, follow the
instructions on the following pages according to your
model of rider.
NOTE:
References to LEFT
and RIGHT indicate the
left and right sides of
the tractor when facing
forward in the operator’s
position. Reference to
the FRONT indicates the
grille end; to the REAR,
the rear end of the rider.
Figure 1
Figure 2
1 3 A M
7 9 0
G 0 0 0
Indicates Model Series 700
Sample Model Number
w
w
w
.
m
t
d
p
r
o
d
u
c
t
s
.
c
o
m
M
T
D
L
L
C
P
.
O
.
B
O
X
3
6
1
1
3
1
C
L
E
V
E
L
A
N
D
,
O
H
4
4
13
6
3
3
0
-
2
2
0
-
4
6
8
3
8
0
0
-
8
0
0
-
7
3
1
0
Model Plate