Filter
Top Products
THE MINELAB EXPLORER II
57
QUICKSTART
5
AUDIO: ADJUSTING THE SOUNDS
Ferrous
Main Menu > Audio > Sounds > FERROUS
Selecting FERROUS adjusts the tone according to the target’s
ferrous content (the horizontal axis of the Smartfind screen or the
first number in the Digital display). A low ‘blaat’ tone denotes a highly
ferrous object, displayed on the left of the screen and having a high
‘Fer’ number. A high pitched ‘squeak’ tone denotes a non-ferrous
target, displayed on the right of the Smartfind screen and having a
low ‘Fer’ number.
Clear the Smartfind screen to test the Ferrous sound. There are two
ways to do this: adjust the Iron Mask level to -16 or choose CLEAR
from Main Menu > Discrim > SELECT.
NOTE When the Iron Mask is set to the left of the Smartfind
screen (setting -16) there will be a maximum variation in
pitch between detected objects. When the Iron Mask is fully
activated (setting 0) there will be no signal for objects with
ferrous content.