Filter
Top Products
-- 13 --
DECLARATION OF CONFORMITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46--36--146500, as authorised
representative in the Community, declare that the garden blower/vacuum modelMcCulloch
GBV 345 withserialnumbers datingfrom 2012and onwards(theyearis clearly stated onthe
rating plate, followedby theserialnumber), comply withtherequirements of the COUNCIL’S
DIRECTIVES:
of 17 May 2006 “relating to machinery” 2006/42/EC;
of15December2004“relatingtoelectromagneticcompatibility”2004/108/EC,andapplicable
supplements; and
of 8May 2000“relatingto the noise emissions in the environment” in accordance with Annex
V of 2000/14/EC. For information relating to noise emissions, see Technical data section.
The following standards have been applied: EN ISO 12100-1/A1:2009, EN ISO
12100-2/A1:2009, CISPR 12:2007.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, S--754 50 Uppsala, Sweden, has
performed voluntary type examination on behalf of Husqvarna AB. The certificate(s) are
numbered: SEC/09/2024.
12--11--15
Ronnie E. Goldman, Director of Engineering
Authorized representative for Husqvarna AB and
responsible for technical documentation
TECHNICAL DATA
MODEL: GBV 345
ENGINE
Engine displacement, cm
3
25
Maximum Engine Power, according to ISO 8893, kW 0,75
Idle Speed +/-- 400, rpm 3700
Catalytic converter muffler Yes
IGNITION SYSTEM
Spark plug Champion RCJ--6Y
Electrode gap, mm 0,6
FUEL AND LIBRICATION SYSTEM
Fuel tank capacity, cm
3
540
WEIGHT
Weight without fuel and tubes, kg 4,4
NOISE EMISSIONS
(see Note 1)
Sound power level, measured dB(A) 103,9
Sound power level, guaranteed L
WA
dB(A) 108,0
SOUND LEVELS
(see Note 2)
Equivalent sound pressure level at the operator’s ear, measured
according to ISO 22868, dB(A)
Equipped with blower tubes and nozzle (original) 96,7
Equipped with vacuum tubes (original) 98,6
VIBRATION LEVELS
(see Note 3)
Equivalent vibration levels (a
hv,eq
) at handles, measured
according to ISO 22867, m/s
2
Equipped with blower tubes and nozzle (original), right 10,1
Equipped with vacuum tubes (original), left/right 8,2/10,4
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity
with EC directive 2000/14/EC. Reported sound power level for the machine has been mea-
sured with the original cutting attachment that gives the highest level. The difference between
guaranteed and measured sound power is that the guaranteed sound power also includes
dispersion in the measurement result and the variations between different machines of the
same model according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical
statistical dispersion (standard deviation) of 1 dB(A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (stan-
dard deviation) of 1 m/s
2
.