Filter
Top Products
A) K768-2 Two Wheel Undercarriage
For in-plant and yard towing. (For highway use,
consult applicable federal, state, and local laws
regarding possible requirements for brakes, lights,
fenders, etc.) Two 4.80 x 12" four-ply tubeless tires.
Bed-plate mounting. Has stand for tow bar and grips
for hand pulling. Overall width 43.06" (1.09 m).
B) K886-1 Canvas Cover
To protect the Ranger 9 when not in use. Made from
attractive red canvas material that is flame retardant,
mildew resistant, and water repellent.
C) K894-1 Spark Arrester Kit
Includes a heavy gauge steel, approved spark
arrester and clamp for easy mounting to muffler
exhaust pipe.
D) K896-1 GFCI Receptacle Kit
Includes two UL approved 115 Volt ground fault circuit
interrupter duplex type receptacles with covers and
installation instructions. Replaces the two factory
installed 115 Volt duplex receptacles. Each recepta-
cle of each GFCI duplex is rated at 15 Amps but the
maximum total current from each GFCI duplex is
limited to 20 amps.
E) K930-1 TIG Module
Provides high frequency and shielding gas control for
AC and DC GTAW (TIG) welding applications.
Compact case is designed for easy carrying,
complete with handle. High frequency bypass is built
in. The K939-1 Docking Kit is available for mounting
the TIG Module on top of the Ranger 9. The K936-1
control cable is required.
F) K933-1 Four Wheel Undercarriage
Allows movement of the Ranger 9 by hand without
lifting. Easily assembles to the Ranger 9. It includes
two rugged, hard molded wheels and two durable
pneumatic tires. The spring loaded handle provides
convenient, comfortable steering. The k934-1 Bracket
is available for mounting a gas cylinder on the under-
carriage.
G) K934-1 Bracket for Mounting a Gas Cylinder to a
K933-1 Undercarriage
Easily mounts on the back of the K933-1 Four Wheel
Undercarriage to carry a welding gas cylinder.
H) K889-2 Two Wheel Undercarriage
For moving by hand. Two 4.00" x 8" industrial tires.
Overall width 29" (.74m).
I) K857 Remote Control
Consists of a control box with 25' (7.5 m) of four
conductor cable. Permits remote adjustment of output
voltage.
J) K893-1 Caster for Two Wheel Undercarriage
Mounts to the front of the K889-2 Two-Wheel
Undercarriage to allow easy movement on smooth
surfaces. Includes a 6" diameter hard rubber wheel
with a convenient toe-on, toe-off locking brake.
K) K702 Accessory Kit
Accessory Set includes 35 ft. 2 AWG electrode cable,
30 ft. 2 AWG work cable, headshield with number 12
filter, work clamp, and Cooltong
®
300 electrode
holder. Cables are rated at 250 Amps, 40% duty
cycle.
L) K802-R Power Plug Kit
Provides four 115 Volt plugs rated at 15 Amps each
and one dual voltage, full KVA plug rated at 115/230
Volts, 50 amps.
M) K802-N Power Plug KIt
Provides four 115 Volt plugs rated at 20 Amps each
and one dual voltage, full KVA plug rated at 115/230
Volts, 50 Amps. (Not for use with K1420-2 CSA
machine and machines with GFCI receptacles.)
OPTIONAL FEATURES
- 9 -