Filter
Top Products
13
DC-1 Version 4 Digital Controller
System
Configuration
Display Adjustment
To adjust contrast, use SELECT to highlight CONTRAST ADJUSTMENT,
and ▲ or ▼ to set the contrast of the display to its maximum as seen from
your listening position.
Depending on the location of the DC-1 in your room, you may need to adjust
the front panel display contrast for optimum viewing. To do this, press the
▲, ▼ or SELECT buttons on the Remote to enter the Main Menu. Press ▼
twice to select DISPLAY ADJUST.
Press SELECT to highlight the Display Adjust Menu. Press ▼ to select
FRONT PANEL DISPLAY.
If you want to turn the front panel display off, use SELECT to highlight
STATUS, then use ▲ or ▼ to select ALWAYS OFF. With software Version
4, you can select 2 SECONDS which will cause the display to shut off
automatically two seconds after a command is received.
Press DONE twice to return to the main menu.
In addition to the front-panel display, the DC-1 contains a character genera-
tor for a video overlay display on monitors. Since the on-screen display is
capable of showing the full menu of options available at any point, calibra-
tion of the system is faster and easier if the DC-1
video output is connected
to a video monitor.
Adjustments to the on-screen display are made from the Display Adjust
menu. To display this menu, press the ▲, ▼ or SELECT buttons on the
Remote to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.
Press SELECT to enter the Display Adjust menu. Press SELECT to open the
On-Screen Display menu.
The Video
On-Screen Display