Land Pride SPS20 Spreader User Manual


 
4
Important Safety Information
SPS20 & SPS30 Series Pulverizer Seeders 313-242M
6/26/02
Land Pride
Safety Labels
1. Your pulverizer seeder comes equipped with all safety labels
in place. They were designed to help you safely operate your
pulverizer seeder. Read and follow their directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. To order new labels
go to your Land Pride dealer.
4. Some new equipment installed during repair requires safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request. To
order new labels go to your Land Pride dealer.
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
818-543C
Danger: Guard Missing
(Beneath Chain Guard)
18493
838-111C
Danger: Keep Away
18493