Land Pride SPS20 Spreader User Manual


 
25
6/26/02
SPS20 & SPS30 Series Pulverizer Seeders 313-242M
Section 7 Troubleshooting
Land Pride
Section 7
Troubleshooting
Problem Solution
Uneven seed spacing or uneven stand.
Check for plugging in feed cup.
Reduce ground speed.
Check for trash or mud buildup on roller.
Actual seeding rate is different than
desired.
Seed treatment will affect seeding rate if the chemicals buildup in feed cup. Unless
cleaned regularly, this buildup can cause breakage of the feed cup shaft.
Feed cup sprocket locked up or twisted
feed cup drive shaft.
Check for foreign matter lodged in feed cup sprocket.
Rollers not turning freely.
Check for trash or mud buildup on roller end.
Seed does not meter.
Clutch not engaged. See Clutch Engagement (Disengagement) page 11 Figure 3-6
Shanks bending sideways
Lift shanks out of ground when turning