Filter
Top Products
9
Section 1 Assembly and Setup
7/14/08
RC45180 & RCM45180 Rotary Cutter 312-382M
Land Pride
Table of Contents
3. Install screw jack (#7) to hitch and secure with at-
tached pin. Adjust jack until center deck is approxi-
mately horizontal.
Slow Moving Vehicle
Bundle Assembly
Refer to Figure 1-3:
Install bracket (#1) with hardware shown to bearing cap.
Then install Slow Moving Vehicle (#2) to bracket (#1) by
using screw 1/4" x 5/8" Long (#3) with square nut (#5) and
lock washer (#4).
Hydraulic Plumbing
Refer to Figure 1-4:
The standard cutter is equipped with hydraulic cylinders
for each wing to provide simultaneous folding.
An optional hydraulic lift adjustment kit is also available
from your Dealer.
11153
Hitch Assembly Illustration
Figure 1-2
Slow Moving Vehicle Assembly
Figure 1-3
13895
Hydraulic Plumbing
Figure 1-4
14102