Filter
Top Products
Section 8: Troubleshooting
PSN2096 Primary Seeders 313-306M
4/03/08
Land Pride
30
Table of Contents
Section 8: Troubleshooting
Problem Solution
Uneven seed spacing or uneven
stand.
Check for plugging in seed cup.
Reduce ground speed.
Check for trash or mud build-up on rollers.
Actual seeding rate is different than
desired.
Seed treatment will affect seeding rate if the chemicals build-up in seed cup.
Unless cleaned regularly, this build-up can cause breakage of the seed cup shaft.
Feed cup sprocket locked up or
twisted feed cup drive shaft.
Check for foreign matter lodged in seed cup sprocket.
Rollers not turning freely.
Check for trash or mud build-up on roller end.