Filter
Top Products
English – 3
Introduction
This operator’s manual describes in detail how the
one-man sawmill is used and maintained and how
servicing is to be carried out. It also describes the
measures to be taken for maximum safety and how the
safety features are designed and function, as well as
how they are inspected, maintained, and repaired if
necessary.
NOTE! The section dealing with safety must be
read and understood by all those who install, use,
or repair the sawmill.
The operator’s manual comprises installation, usage,
and the different maintenance procedures that can be
performed by the operator. More comprehensive
servicing or troubleshooting should be performed by
the dealer’s service personnel.
The operator’s manual describes all the requisite
safety features and should be read and understood by
the user before the sawmill is assembled.
Symbols and warning signs shown on the next page
can be found in this operator’s manual and on the one-
man sawmill. If a decal on the sawmill has been
damaged or is worn, a new warning decal must be
applied as soon as possible in order to ensure the
greatest possible safety when using the sawmill.
The one-man sawmill shall only be used to cut boards
and planks from logs.
The one-man sawmill should be used outdoors and
not in enclosed spaces.
INTRODUCTION